Our Products: Deep Penetrating Sealer(DPS)    Concrete Sealer(CS)    Top Sealer(TS)    Repair Mortar Overlay (RMO)   

Crack and Seat for Concrete Pavement Maintenance
Jun 30,2015
Crystalline Concrete Waterproofing for Wastewater Pool
Jun 10,2015
The factors that influence the using effects of Concrete Sealers
Apr 13,2015
The benefits of floors that treated by Concrete Sealer
Apr 09,2015
Deep Penetrating Sealer(DPS)
Concrete Sealer(CS)
Top Sealer(TS)
Repair Mortar Overlay (RMO)

Online trade


Brief Introduction:
Goodcrete Top Sealer (TS) is a clear, non-glossy, water based water repellent, that has the ability to preserve and
enhance the lifetime of natural stones such as sandstones, or marble and even paving, brick, wood and concrete. 
Goodcrete Top Sealer protects them against the elements that they are subjected to on a daily basis. Rain, salts,
oils and chemicals all wear down the integrity of these surfaces over years, leading to unsightly stains from mold,
algae and gradual decay. Top Sealer is a non-toxic, one coat application that completely seals and waterproofs a
variety of surfaces. Goodcrete Top Sealer should not alter the color, texture, or any other physical charac- teristic
of the surface to which it is applied, leaving a clear natural finish that will completely repel water, seal and waterproof
the surface.

01. Sealing of concrete and cementitious surfaces, as a decorative architectural finish.
02. Sealing of brick and block work, natural stone such as granite, marble and sandstone or even wood.
03. Be used as sealer in residential applications such as bathrooms, patios, decks, driveways, pathways and walls.


01. Water based, non-toxic, green product.
02. Ready to use and easy to apply.
03. Only one coat required.
04. Does not alter the natural color, texture or any other physical characteristic of the surface.
05. UV resistant
06. Prevents the growth of fungus, moss, algae, etc.
07. Reduced efflorescence and darkening of stones.
08. Reduces freeze-thaw damage.
09. Prevents rising dampness/pealing of paint when applied to red bricks.

Recommended Uses:

All concrete or cementitious structures.
Decorative architectural finishes.
Brick and blockwork.
Natural stone such as granite, marble and sandstone.
Highway structures.
Building facades including mosaic and tile surfaces.
Non-glazed tiled surfaces, such as floors, bathrooms and kitchens.

Method of Application:

01. Make sure the surfaces are clean and free from oil and grease.
02. If necessary clean the concrete surface with deep cleaner.
03. The surface should be dry before the Top Sealer is applied.
04. Shake the container of Top Sealer well before using it.
05. The Top Sealer must NOT be diluted or mixed with any other liquid.
06. Spray the Top Sealer from the bottom upwards on vertical surfaces and work into the surface with a soft brush,
      mop or cloth.
07. If the Top Sealer is being absorbed rapidly into a permeable surface, apply more material before moving on to 
      the next area to be treated.
08. Top Sealer is a one coat operation. Do not apply additional material after the surface has dried.
09. Protect glass surfaces and aluminum from over spray as slight etching of such surfaces might occur.
10. Excess Top Seal will result in white dry powder on the surface and can be removed with a dry cloth.

Coverage 15-35m2 (approx.150-350 sq.ft.) per gallon (one coat). The coverage depends on the porosity and absorption

of the substrate.


20KG/Pail, or 220KG/Barrel, i.e. 5 US Gallon/Pail, 55 US Gallon/Barrel



Email: Linda@goodcrete.com
CopyRight © 2014-2017
, All Rights Reserved. 
About us
Contact us