Our Products: Deep Penetrating Sealer(DPS)    Concrete Sealer(CS)    Top Sealer(TS)    Repair Mortar Overlay (RMO)   

TECHNICAL
Crack and Seat for Concrete Pavement Maintenance
Jun 30,2015
Crystalline Concrete Waterproofing for Wastewater Pool
Jun 10,2015
The factors that influence the using effects of Concrete Sealers
Apr 13,2015
The benefits of floors that treated by Concrete Sealer
Apr 09,2015
PRODUCTS
Deep Penetrating Sealer(DPS)
Concrete Sealer(CS)
Top Sealer(TS)
Repair Mortar Overlay (RMO)

LINKS
Online trade
goodcrete.1688.com

 
The benefits of floors that treated by Concrete Sealer

1. Elimination of dusting from efflorescence. In unpolished concrete floors, tiny particles of dust are pushed to the surface through an upward force commonly called dusting. Dusting always forces epoxies etc film coating off of the surface of concrete floors, and can make maintenance a costly priority.

2. Transformation of porous concrete into a dense surface that inhibits water, oil and other contaminants from penetrating the concrete's surface.

3. Increased strength, for old, deteriorating, weak concrete finishes, with more abrasion resistance  and an increase in impact resistance. There are many ways for concrete floors to break as they age: rain damage, surface stress, delamination, improper curing, curled cold joints, joint shoulder failure and several more. The polishing process and concrete sealer can remove the top part of the surface of the old concrete floor (including any patchy, partial, or whole coatings) and harden the exposed concrete surface beneath.  Old, deteriorating, or weak concrete is strengthened and its impact and abrasion resistance is increased.

4. Increased ambient lighting which will enhance the beauty of your floor and reduce the cost of lighting.  One facilitiy actually reported that they were able to turn off a third of the lights in their facility, saving them over $1000 in energy costs a year!

5. Higher levels of co-efficient of friction than any coating on the market. Concrete Sealer treated, wet or dry, polished concrete floor surfaces meet, and most often exceed, OSHA standards. When a concrete floor is treated by concrete sealer and polished, it may look like marbles, however, its friction co-efficient is higher than ordinary concrete. Simply put, it is much harder to slip on a polished concrete floor, wet or dry.

6. Elimination of tire marks from fork trucks, vehicles and industrial type hoppers and parts baskets.  In other floor systems, a tire mark is usually there to stay until the floor is repaired. When a forklift burns out on a coated floor the friction caused between its tire and the concrete surface leaves a mark. This does not occur on a polished concrete floor as there are no resins to burn on the concrete's surface.

7. Decrease in overall fork truck tire wear and tear (due to the smoothness of the floor and the leveled “curling” joints).  In heavy industrial facilities, rough and uneven concrete surfaces cause tires to wear out rather quickly. Most concrete floors have small "curling" joints, from where the concrete bows upward on the edges during concrete curing. Getting a polished concrete floor on these areas will level the joints and make the entire surface smooth, resulting in tires lasting much longer.

8. Decrease in floor maintenance and less drag on cleaning equipment; making brushes, pads and mops last longer.  Most floor systems, including ordinary concrete floors, require aggressive scrubbing in order to maintain a clean environment and nice appearance. Oil, paint, and other staining spills can leave lasting impressions on most surfaces.  A polished concrete floor doesn't require this intense scrubbing -- the surface is so tightly compacted that it actually repels oils and other substances. This makes cleaning much easier and a maintenance schedule less demanding than with other floors.

9. Polished areas can be put into service immediately after the process is complete. Due to the cleanliness of the concrete polishing process and the lack of toxic or hazardous chemicals, food manufacturing corporations, pharmaceutical manufacturers and other medical supply corporations meet the strict condition standards that their floors require. In many cases, the concrete polishing process can be completed while the plant is in full production. Polished concrete has even been applied in hospitals with patients, family and hospital staff walking on the floors, avoiding any interruption to their daily routine & activity.
10. Cost-Effective.  Concrete sealer treated and polished concrete is one of the most economical, cost effective flooring alternatives out there. The reduced costs associated with saved energy, reduced tire wear, maintenance reduction, and especially the long-lasting durability shows that polished concrete is a budget sensible, as well as beautiful, flooring system.

11. No More Stripping and Waxing.  The Concrete Sealer treated and polished concrete floor  is no need to wax or strip the floor. All of your allocated maintenance labor and material costs for stripping and waxing can now be eliminated and added to your bottom line.

12. Beauty.  Concrete Sealer treated and polished concrete floors are second to none in durability and appearance. It is often mistaken for marble due to its smooth sleek surface. Unlike any other alternative floor system, its aesthetic value makes polished concrete a viable option for most industries.

13. Longest-Lasting Floor Solution Available.  There is simply no comparison to other floor systems when it comes to the life of a Concrete Sealer treated and polished concrete floor. In the event the concrete floor needs to be refurbished, a repolish can be done at a fraction of the cost of any other floor system, extending the life that much further.

Email: Linda@goodcrete.com
Tel:13503217507
CopyRight © 2014-2017
GOODCRETE
, All Rights Reserved. 
About us
Products
News
Videos
FAQ
Technical
Joblist
Contact us